services

G & L Metal Polishing
990 W. Commodore Blvd.
Jackson, NJ 08527
(732) 833-7490

[ home ] [ about us ] [ services ] [ pricing ] [ nova ] [ seminar ] [ our work ] [ contact us ]

	Moldings Straightened
	Dents Removed
	Trim Polished to a High Luster
	Reasonable Rates
	High Quality Craftsmanship
	Fast Turn Around Time
	Technical Advise

G & L Metal Polishing is committed to providing our customers with the highest quality restoration of both aluminum and stainless products.

The Following is a step by step outline on our restoring process.

	Strip Off Existing Paint (If Any)
	Clean Parts Of Grease, Dirt Ect
	Remove Anodizing
	Remove Dents & Straighten
	On Heavily Sand Blasted parts, Start with 80 Grit Down to 240 Grit sandpaper Flap Wheels
	Prepare Parts For Final Polishing Using Sisal Wheel & Black Cake Rouge
	Final Polishing
	Clean off Excess Rouge
	Paint If Requires

	Clean Parts Of Grease, Dirt Ect
	Remove Dents & Straighten
	Sand Down Parts With Expander Wheel Using 220 & 320 Grit Sandpaper
	Prepare For Final Polishing using Sisal Wheel, Then Spiral Sewn Wheel With Gray Koukour Rouge
	Final Polishing

Restoring an old cycle or boat that has tarnished aluminum?
No problem! G&L has polished everything from small cycle parts to boat window frames.

Products Used
G&L uses top-of-the-line Baldor buffing machinery, rouge and buffing wheels to provide you with a top quality job. All products are purchased from Tar Heel Parts in Matthews, NC. http://www.Tarheelparts.com.